8 min read

Annual WPS Library Review: A CWI Quality Manager's Audit Checklist

Year-end WPS library audit guide for CWI quality managers in structural fab shops—edition currency, essential variable coverage, PQR traceability, welder continuity, and AISC certification readiness.

New to procedures? Start with WPS welding: what a welding procedure specification is, with a filled-in example.

The end of the year is the right time for a structural fab shop's CWI or QC manager to pull out the welding procedure library and confirm it still matches reality. Projects drift: new processes get added to the shop floor, filler metals get substituted mid-run, welders change, and sometimes an edition transition or a new code cycle makes existing procedure documentation incomplete. An annual WPS library review is the systematic check that keeps an AISC-certified shop audit-ready and prevents production surprises when a third-party CWI or owner's inspector arrives on-site.

This checklist walks through the key review areas. It is structured for shops operating under AWS D1.1:2025 as the primary code, though the approach applies equally to shops carrying ASME IX, AWS D1.6, or D1.5 qualifications alongside their D1.1 library.

1. Edition Currency Check

Goal: Confirm every active WPS references the edition of AWS D1.1 in force for current and upcoming contracts.

AWS D1.1:2025 is the current ANSI-approved edition. Projects contracted under D1.1:2020 are still active in many shops, and the governing edition is what the contract specifies—not necessarily the latest published version. However, if your shop has adopted 2025 as the in-house standard, all new WPS documents should reference it.

Review tasks:

  • Pull every active WPS and confirm the edition reference in the qualification basis or header block.
  • For WPS documents marked "Prequalified per AWS D1.1:2020 Clause 5," verify that the essential variable rules and prequalified joint geometry are still valid under 2025 if the shop has transitioned.
  • Note any contracts specifically calling out 2020 or earlier—those WPS documents do not need to change for those jobs, but the distinction should be documented.

The 2025 vs. 2020 essential variable renumbering is the main structural change relevant to your review: essential variables for SMAW/GMAW/FCAW/GTAW/SAW are now Table 6.6 (was Table 6.5 in 2020). CVN supplementary essential variables are Table 6.8 (was Table 6.7 in 2020). If your WPS documents cite table numbers, verify they match the edition claimed.

Rule library based on AWS D1.1:2025; verify against your governing edition.

2. WPS Coverage vs. Production Scope

Goal: Confirm every weld type currently made in production is covered by an active, qualified WPS.

This is the most common audit failure: the shop has a solid library for beam-column connections, but it added a product line—mezzanine platforms, handrail frames, stair assemblies, equipment pads, cable tray supports—and no one checked whether the existing WPS covers those weld configurations.

Review tasks:

  • Pull your current production scope from the estimating or project list. List every product type and its weld joint configurations (fillet, PJP, CJP groove; positions; base metals).
  • Compare against the WPS library. For each product, identify the WPS number intended to cover it.
  • Flag any product or weld type with no clear WPS coverage. These need either a new WPS or a scope extension of an existing one before production begins.
  • Review for base metal traceability: does each WPS cover the actual ASTM designations purchased? A36 and A992 are the most common, but if the shop has taken delivery of A529 Grade 55, A500 Grade C, or other metals not in the original WPS scope, check coverage.

3. Essential Variable Traceability to PQR

Goal: Confirm each tested WPS (Clause 6) traces to a valid PQR with no undocumented essential variable departures.

This is the technical core of the WPS library review. For every WPS developed by test (not prequalified), the PQR on file must reflect the actual test conditions, and the WPS must stay within the essential variable ranges that the PQR supports.

Review tasks:

  • Pull each Clause 6 WPS and its supporting PQR(s). Confirm the PQR number(s) are listed on the WPS.
  • For each PQR, confirm the original test records are on file: test coupon dimensions, test method (tensile, guided bend, CVN if required), test lab report, and witness certification (if required by the contract or owner spec).
  • For each essential variable in AWS D1.1:2025 Table 6.6, compare the WPS production parameter range against the PQR test parameters:
    • Filler metal classification: WPS must match PQR classification (or be within the allowed substitution range per Clause 6)
    • Base metal group: WPS base metal must be within the group qualification range established by the PQR
    • Thickness range: WPS production thickness must fall within the PQR qualification range per Clause 6.8 (qualified range is typically 1× to 2× the PQR test plate thickness for groove welds)
    • Heat input range: qualified range from PQR with applicable allowable variation
    • Position: WPS position must be within the PQR qualification
  • If any WPS production parameter falls outside the PQR support range, that is a nonconformance. Issue an NCR and determine the corrective path: either run a new PQR test, adjust the WPS production range back inside qualification, or find a prequalified route if applicable.

4. PQR Physical Test Record Completeness

Goal: Confirm PQR test records satisfy D1.1 documentation requirements and would survive third-party scrutiny.

Review tasks:

  • Verify each PQR has a completed AWS D1.1 PQR form (or equivalent in Annex J format) with all required fields: base metal specification, heat/lot number, filler metal specification and classification, preheat/interpass temperatures, actual measured amperage/voltage/travel speed, and test results.
  • Confirm test lab reports are attached: tensile test load/area/location of fracture, guided bend test photo or description of results, CVN test results if D1.8 demand-critical or supplementary essential variables apply.
  • If a PQR was witnessed, the witness certification or statement should be on file. Some owner specifications and AISC Chapter 4 quality programs require witnessed PQRs.
  • Review for PQR expiration concerns: D1.1 does not expire a PQR, but if the original test plates or samples are needed for follow-up testing (retests, additional bend specimens), their retention should be verified per your QC manual.

5. Filler Metal and Consumable Traceability Review

Goal: Confirm filler metals currently in shop inventory and in production use match the WPS.

Filler metal substitutions are one of the most common unrecorded essential variable changes. A supervisor substitutes E71T-9 for E71T-1 when inventory runs low, and the production record reflects the WPS calling for E71T-1. This is a potential nonconformance even if both electrodes are classified at equivalent strength.

Review tasks:

  • Pull filler metal inventory records and delivery certifications. Confirm each wire/electrode classification in use matches the WPS filler metal field.
  • Verify filler metal manufacturer certifications are current and on file for each classification. AWS D1.1:2025 requires filler metals to meet their AWS specification; the certification is the proof.
  • Check hydrogen designator compliance: if the WPS specifies E7018-H8, verify the inventory is H8 or better (H4), not unlabeled H16 stock.
  • Review storage records for covered electrodes (SMAW): E7018 and low-hydrogen electrodes must be stored in a stabilized oven or issued from unopened containers. Confirm the oven temperature log is current and oven function verified.

6. Welder Continuity and WPQ Currency

Goal: Confirm all production welders hold current WPQs for the work they are assigned.

AWS D1.1:2025 Clause 6.4.1 (the six-month continuity rule) requires that a welder who has not welded with a given process for six months must requalify under that process. This is a rolling clock that the QC manager must actively track.

Review tasks:

  • Pull the welder roster and WPQ file. Confirm each active welder has a current WPQ covering the process, position, and base metal thickness range for their current assignments.
  • Review the last welding date for each welder per process. For any welder approaching the six-month threshold, schedule a continuity verification weld or requalification test.
  • Check process coverage: a welder qualified for SMAW only cannot be assigned to a FCAW-G job without a separate WPQ. Confirm process assignments match WPQ coverage.
  • For shops using continuity tracking software, verify the system data reflects actual production dates from shop travelers, not just the WPQ issue date.

This is a critical review area because continuity lapses discovered during production—by an owner's CWI or special inspector—can result in work being rejected. Discovering the gap in the annual review is far less costly.

7. NDE Procedure Currency

Goal: Confirm NDE procedures referenced on WPS packages are current and applicable to the work.

If the shop performs in-house UT, MT, or PT, those procedures must be current and reference the correct code edition. If NDE is subcontracted, verify the NDE firm's procedure qualification documents are on file and consistent with D1.1 requirements.

Review tasks:

  • Confirm UT procedures reference AWS D1.1:2025 Annex J or the applicable technique section.
  • For MT and PT, confirm the magnetic particle and liquid penetrant procedures identify acceptance criteria from D1.1 Clause 7 or the project spec.
  • Verify NDE personnel certifications (SNT-TC-1A or ACCP Level II or III) are current for all in-house NDE technicians.

8. AISC Certification Pre-Audit Self-Assessment

For shops that hold AISC Standard or Advanced certification, the annual WPS review should be timed before the renewal certification audit cycle. The AISC auditor will pull random WPS documents, trace them to PQRs, and verify that the shop's production scope is covered.

Gaps most commonly flagged in AISC audits:

  • WPS documents missing the qualifying basis (prequalified clause reference or PQR number)
  • PQR test records incomplete or missing test lab reports
  • Production parameter records (travelers, inspection records) that do not reference a WPS number
  • Welder WPQ files missing or WPQ expired under the six-month rule
  • Shop scope (from quality manual) includes product lines not covered by any WPS

Closing these gaps before the audit—rather than fielding NCRs during it—keeps the certification renewal process clean and demonstrates a functioning QC management system.

Recommended Review Schedule

Review Area Frequency
WPS coverage vs. production scope Annual + at new project award
PQR essential variable traceability Annual
Filler metal certification currency Annual + at new lot receipt
Welder continuity tracking Monthly (rolling clock)
NDE procedure and personnel cert Annual
AISC certification pre-audit self-check 60 days before renewal audit

For related tools and resources, see our guide on WPS requalification triggers checklist and common WPS deficiencies in third-party audits. For CWI qualification tracking and welder continuity monitoring, the welder continuity six-month rule explains the D1.1 requirement in detail.

If your shop wants a faster path to a complete, audit-ready WPS library, the WPSwelding platform generates D1.1-compliant WPS documents and tracks welder continuity automatically—purpose-built for the CWI quality manager who needs correct documentation without reinventing a Word template every time.

FAQ

Frequently asked.

How often should a fab shop review its WPS library?
At minimum annually, and immediately after a new edition of the governing code is released or adopted by contract. An annual review before the new project season also captures drifts: updated filler metal classifications, changed essential variables from process or equipment updates, and welder continuity gaps. Many AISC-certified shops build the WPS review into their QC calendar as a year-end close-out task.
Does a WPS expire under AWS D1.1?
AWS D1.1 does not set a fixed expiration date on a WPS, but it does require that the WPS remain current with the qualified essential variables from its supporting PQR. A WPS developed under a prior edition remains valid if the essential variables have not changed and the production scope still matches—but if the shop has added new processes, base metals, or thicknesses outside the original qualification range, the WPS must be supplemented or a new PQR test completed.
What triggers a WPS requalification outside of an annual review?
Any change to an essential variable listed in AWS D1.1:2025 Table 6.6 (or Table 6.7 for ESW/EGW processes, or Table 6.8 for CVN supplementary essential variables) requires requalification by test. Common triggers: changing filler metal classification, increasing or decreasing heat input outside the qualified range, adding a new base metal outside the qualified group, or changing from one base material group to another not covered by the original PQR.
How should a CWI document WPS review findings?
Use a formal NCR (nonconformance report) or corrective action log in your QC system. Record the WPS number, the gap found, the required corrective action (update WPS, run new PQR, obtain a prequalified basis), and the responsible party and due date. Close each NCR before the next certification audit or project start. Keep the closed NCRs as evidence of a functioning QC system.

More from the blog